10mm x 2.5t Galvanised Trailer Safety Chain
10mm x 2.5t Galvanised Safety Chain – 64cm long for 10mm chain and 64cm long for 13mm chain.
The caravan and trailer safety chain are essential in coupling failure between the vehicle and trailer. Worn tow balls and couplings are a major cause of coupling detachment from the towing vehicle.
We think you should know that this safety chain is made in Australia.
- The Safety Chain rating is stamped every four links.
- Two chains per trailer or caravan are mandatory on all trailers over 2.5t.
Is your trailer or caravan chain too short?
The solution
- cut the trailer safety chain from your chassis rail, leaving only the welded link on your chassis.
- Install a new piece of rated galvanised 13mm longer chain.
- Connect the hammerlock to the new chain and the welded link on your chassis rail.
What you cannot do
- Join multiple shackles until you reach the desired length.
- Insert un-rated links
- Use hooks on the trailer safety chain
- Use bolts to attach the safety chain to the trailer
Galvanised safety chains and shackles are illegal on all trailers over 3.5t.
How many safety chains are required on a trailer?
- One 10mm safety chain on trailers up to 2500kg.
- Two 13mm safety chains on trailers up to 3500kg.
Why cross the trailer safety chains?
In extreme circumstances resulting from an accident or oversight, couplings can become detached from the tow ball. Cross chains prevent the coupling from falling to the ground and catch it in a chain cradle.
How should trailer safety chains be attached to the tow bar and trailer?
- Attach chains to the tow bar via a rated dee or bow shackle or other suitable rated connection.
- Attach the chain to the trailer via a hammerlock to a chain holder or weld one link horizontally to the trailer chassis rail.
It is essential to remember…
There is no chain welding below the chassis rails.
Trailers up to 2.5 tonnes ATM must have at least one safety chain complying with AS 4177.4 – 1994 (Trailer and light trailer towing components – Safety chains up to 3.5 tonnes capacity), or as amended from time to time. This standard allows for steel safety chains by the following:
- to 1.0 tonne, a chain size of 6.3 mm
- up to 1.6 tonnes, a chain size of 8 mm
- up to 2.5 tonnes, a chain size of 10 mm
Purchase spare parts and attachments for Dee Shackles
- Rated Bow Shackles – 4WD
- Rated Dee Shackle
- Dee Shackles and Safety Chains
- Safety Chain Holder for Aluminium Chassis
- Safety Chain Holder to 3.5t
- Hammerlock to suit Galvanised Safety Chain
- Safety Chain With Hammerlock And Holder Kit
Additional information
Weight | 2 kg |
---|---|
Dimensions | 60 × 4 × 4 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
Reviews