6t x 8 Leaf x 65mm Rocker Roller Springs
Price
$1,432.62 Inc.GST
Shipping
Please Note: This item will not ship until late September. For an accurate ETA, please get in contact with our sales team.
8 Leaf x 6t Rocker Roller Springs – 18″ wheels suit Tandem Trailers
8 Leaf x 6t x 65mm Rocker Roller Springs 18-inch wheels. 8mm Springs are robust for the long haul, suitable for flat top and livestock trailers.
Important: These springs, which can weigh up to 120 kg, will be delivered on a pallet. If you do not have a forklift available, it is wise to have them delivered to a commercial address where they can be forked onto your trailer.
There is a small shipping charge because our sales team will contact you for your preferred method of delivery.
Tandem setups with 60mm wide springs provide a ride between Air suspension and standard rocker suspension.
Purchase replacement springs here.
The price is for two sides, and hanger kits (note: does not include U-bolt kits.)
Here is a clever idea: Use 6t springs and de-rate your trailer to 4.5t. This is a handy way to strengthen your rig if you constantly travel over outback roads.
Includes front and rear springs, centre rocker, centre rocker hanger, front and back hangers, bolts and nylocks.
Other Rocker Roller spring ratings for the full range are here:-
- 6 Leaf – 2.2t to 2.5t on 14″ Wheels
- 7 Leaf – 2.6t to 3t on 14″ Wheels
- 7 Leaf – 3.2t – 3.5t on 16″ Wheels
- 8 Leaf – 3.6t to 4.5t on 16″ wheels
The length of a rocker roller spring can vary from 1mm to 5mm.
The best method to install is as follows:
- Weld the Center bracket into position and connect the centre rocker and attach springs to the centre rocker.
- Install front and back spring hanger brackets onto the springs.
- Stretch the front spring as far as it will go and tack it onto your chassis rail.
- Stretch the back spring as far as it will go and tack it onto your chassis rail.
Accessories
Additional information
| Weight | 100 kg |
|---|---|
| Dimensions | 100 × 50 × 30 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
-
36.4kN Pintle Hitch Tow Bar Receiver (6.0t ATM)
PINTLEHOOK-535 $250.25 Inc.GSTAdd to cart In Stock -
60mm Jayco Leaf Spring – 710mm
Price range: $72.50 through $82.50 Inc.GSTOptions This product has multiple variants. The options may be chosen on the product page In Stock -
Tray Back Camper Landing Leg Stand
JACK-1.4M $260.00 Inc.GSTAdd to cart In Stock -
10-inch Off-Road Electric Backing Plate – Left
BACK-10E-L-O/R $126.50 Inc.GSTAdd to cart In Stock -
Fixed Handle Drop Leg Jack Stand – ASSW-DL
JACK-DL $230.80 Inc.GSTAdd to cart In Stock -
Pintle Tow Ball Protector – Aftermarket Pintle Hooks
PROTECTOR-509 $48.40 Inc.GSTAdd to cart In Stock
Reviews