3/8-inch Copper Washer
Price
$3.00 Inc.GST
Shipping
3/8-inch Copper Washer to suit Brass Adaptors and Brass Elbows
A 3/8-inch Copper Washer prevents hydraulic oil leakage from brass adaptors and elbows when tightened correctly.
When joining hydraulic connectors a copper washer is not required if connecting parts have a male and female olive inside the connector.
Where only a thread exists then a copper washer and adaptor or elbow are require to stop hydraulic leaks.
Brass elbows and adaptors with copper washers are required for the following equipment
- Hydraulic master cylinder
- Al-ko Disc hydraulic calipers
- Trojan Disc Calipers
- Hydraulic parts that require an olive seat
Brass adaptor nuts seal hydraulic lines into components like master cylinders and hydraulic disc brakes.
When connecting dissimilar metals, use copper washers. For example, when combining a brass adaptor with a Dacromet or stainless caliper.
Range of Hydraulic Hose Connectors
- Long tube nut – zinc
- Short tube nut – zinc
- Adaptor nut – Brass
- American Caliper tapered elbow – Brass
- Australian non-tapered elbow – suits all Australian Calipers used on 13 and 14-inch wheels – brass
- 3-Way Brass Block – brass
- 4-Way Brass block – brass
If you find your disc brakes or hydraulic cylinder leaking, you have likely screwed the 3/8 inch nut on your hydraulic lines directly into a component that requires an adaptor nut to complete termination.
Your hydraulic line connector is like to require an olive flange.
If you have not installed an olive flange, your connection will leak.
Calipers do not have olive flanges; therefore, you need an adaptor nut.
Use Teflon tape used on all fittings.
Yes, brass on brass connections should not leak, but it is better to be safe than sorry.
If you are in doubt, contact us via our email address.
Finally, brass is not a suitable metal for bonding; hence the use of Teflon tape is recommended,
Additional information
| Weight | 0.1 kg |
|---|---|
| Dimensions | 2 × 2 × 2 cm |
| Brake Type | Hydraulic |
| Materials | Copper |
| Fitting Type | Washer |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
-
Manutec Replacement Grub Screw Jockey Wheel Handle
JOCKEY-HANDLE-GS-M $13.75 Inc.GSTAdd to cart In Stock -
AL-KO Mechanical Disc Brake Caliper
CALP-M-AL-FP $84.95 Inc.GSTAdd to cart In Stock -
12-inch Electric Brake Shoes
SHOE-12 $38.00 Inc.GSTAdd to cart In Stock -
60mm Jockey Wheel Heavy Duty Clamp
HDCLAMP60 $79.50 Inc.GSTAdd to cart In Stock -
36.4kN Pintle Hitch Tow Bar Receiver (6.0t ATM)
PINTLEHOOK-535 $250.25 Inc.GSTAdd to cart In Stock -
On Sale14% off
Caravan Shock Absorbers suit Jayco
SHOCK-610 Original price was: $215.00.$185.00Current price is: $185.00. Inc.GSTAdd to cart In Stock
Reviews