49kN x 10t Truck Pintle Hook CTA-045738
Price
$200.00 Inc.GST
Out of stock
Shipping
10T Truck Pintle Hook | CTA-045738
Couplemate™ specialises in safe and secure towing equipment. The CM504, or the 10T Pintle Hook, is rated to a maximum ATM of 10,000kg and has a CTA number.
Product Specifications
This pintle hook has a yellow horn and is designed to tow 75mm trailer ring couplings.
- Maximum ATM: 10,000kg
- Maximum D-Value: 49kN
- Component Type Approval Number: CTA-045738
- Hole Centres: 85mm x 45mm – Bolts 1/2 inch x 2.25 inch
- Minimum grade 8.8 bolt
Important: Do not use this component in any application that exceeds the specified maximum D-Value and/or ATM (Aggregate Trailer Mass). If you need a higher ATM or D-Value, you may need: PINTLEHOOK-504
Why is the D-Value important?
Towing capacity for Pintle Hooks is critical when selecting the correct pintle hook because the towing capacity changes depending on your truck and trailer weight.
Finally, the hitch rating is a force measurement due to dynamic testing (2,000,000 cycles at full load) where maximum pressure is applied to the pintle hitch. In the case of a Couplemate 10t pintle hook pintle ring on the right-hand side image, the “D-Value” is 49kN.
Mismatched towing components wear and break prematurely.
- Attain Trailer Weight
- Attain Truck GVM
- Select the correct D-value from the chart below
- Install the Pintle Hook into the 85mm x 45mm hole spacings.
- Failure to select the correct D-Value to match your truck/trailer combination will result in excessive component wear.
Frequently Asked Questions
Two forces are acting on a pintle hook; they are
- D-value is the horizontal force of towing a trailer.
- S-Value is the downward vertical force on the trailer on the tow bar.
What is a CTA Number?
Road vehicle regulation in Australia started a new era on 1 July 2021. The CRN and SARN system was replaced by the Component Type Approval in order to demonstrate regulatory compliance. It’s essentially a certificate.
Read more in our technical article: Introduction to Road Vehicle Compliance (CTA)
What spare parts are available?
Each unit includes high-tensile bolts, spring washers, and nuts.
- Spare Mounting Hardware
- Spare Pintle Safety Chain Clasp
More Pintle Hooks below
- 49kN x 10t Truck Pintle Hook CTA-045738
- 70mm x 4.5t x 104kN Combination Pintle Hook CTA-061572
- 6.0t ATM Combination Pintle Hook – Aftermarket
- 6.0T Combination Pintle Hook & Tow Bar Adaptor Kit
- 75mm x 2000kg Override Ring Coupling
- 84kN x 16.5t Truck Pintle Hook CTA-045955
- Premium Low Wear Combination Pintle Hook
Additional information
| Weight | 6 kg |
|---|---|
| Dimensions | 20 × 20 × 20 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
-
60mm Jockey Wheel Heavy Duty Clamp
HDCLAMP60 $79.50 Inc.GSTAdd to cart In Stock -
36.4kN Pintle Hitch Tow Bar Receiver (6.0t ATM)
PINTLEHOOK-535 $250.25 Inc.GSTAdd to cart In Stock -
60mm Jayco Leaf Spring – 710mm
Price range: $72.50 through $82.50 Inc.GSTOptions This product has multiple variants. The options may be chosen on the product page In Stock -
Tray Back Camper Landing Leg Stand
JACK-1.4M $260.00 Inc.GSTAdd to cart In Stock -
10-inch Off-Road Electric Backing Plate – Left
BACK-10E-L-O/R $126.50 Inc.GSTAdd to cart In Stock -
Fixed Handle Drop Leg Jack Stand – ASSW-DL
JACK-DL $230.80 Inc.GSTAdd to cart In Stock
Reviews