39mm Round Galvanised Lazy Axle
Price
$407.00 Inc.GST
Shipping
39mm Round Galvanised Lazy Axle
39mm round galvanised lazy or unbraked axle has a maximum capacity of 750kg.
Axles over 750kg require brakes.
Tandem axles under 2,000kg require brakes on one axle. Tandem trailers over 2t require electric brakes on all axles. For boat trailers over 2t, electrically activated hydraulic brakes are acceptable.
Axles and hubs are Australian-made by Couplemate and Galvanised in Brisbane; as a result, you are purchasing the best equipment money can buy.
The Galvanised Unbraked Axle kit comprises:
- 39mm Round Galvanised Axle
- 2 x ElectroGal Lazy Unbraked Hubs
- 7/16″ or 1/2″ UNF nuts to suit the stud pattern
- Japanese bearings – LM11949 and LM67048
Available Stud Patterns
- Ford – LM bearings
- HT Holden – LM bearings
- HQ Holden – LM bearings
Find Similar Unbraked Axles Below
- 39mm Round Unbraked Lazy Axle
- 40mm Square Galvanised Axle – Unbraked Hub
- 40mm Square Galvanised Axle – Unbraked Hub
- 45mm Round Unbraked Lazy Axle Kit – 1450kg
- 45mm Round Galvanised Lazy Axle
- 45mm Square Unbraked Lazy Axle Kit – 1450kg – 1600kg
- 50mm Square Unbraked Lazy Axle Kit
- 50mm Square Slimline Galvanised Axle – Marine
- 2t Unbraked 6 Stud Land Cruiser Lazy Hub
- 2t Unbraked 5 Stud Land Cruiser Lazy Hub
- 60mm Round Axle 3t Unbraked Axle
- 60mm Round Axle 3t Unbraked Axle
- 3t x 65mm Round Lazy Axle Kit
Calculating The Correct Axle Measurements
- Measure the offset wheel. The wheel offset is the distance between the inside of the hub and the outside of the rubber.
- Add 50 mm to the offset. Alternatively, choose your distance between the rubber and the chassis.
- Multiply by 2 for both sides. Add your chassis width to the above number.
Still unsure of what measurements to take? Check out this handy guide below:
[P] – Check material specifications. What size and profile is the axle (for example, 45mm Square)
[T] – Overall axle length (tip to tip)
[F] – Hub face-to-hub face measurement
[A] – Chassis width
[C] – Tyre clearance
[B] – Back offset
[H] – Tyre to chassis
[G] – Axle pad centres
Identifying Bearing Combinations
You will also need to identify your bearing combination, which can be done by pulling off a hub and bearings and locating the number laser engraved onto the bearing. You will require both the inner and the outer bearing numbers.
Additional information
| Weight | 30 kg |
|---|---|
| Dimensions | 240 × 50 × 50 cm |
| Stud Pattern | Ford (5 x 114.30mm), Holden HT (5 x 107.95mm), Holden HQ (5 x 120.65mm) |
| Axle Rating | 750kg ATM |
| Axle Style | Straight |
| Axle Type | Unbraked axles |
| Beam Size | 39mm Round |
| Bearing Profile | |
| Coating | Galvanised |
| Brake Type | Unbraked |
| Hub Cap | 45.2mm |
| Grease Seal Type | Marine |
| NSK Bearing # | 11949/10, 67048/10 |
| Seal SKU | 492020 |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
-
Manutec Replacement Grub Screw Jockey Wheel Handle
JOCKEY-HANDLE-GS-M $13.75 Inc.GSTAdd to cart In Stock -
AL-KO Mechanical Disc Brake Caliper
CALP-M-AL-FP $84.95 Inc.GSTAdd to cart In Stock -
12-inch Electric Brake Shoes
SHOE-12 $38.00 Inc.GSTAdd to cart In Stock -
60mm Jockey Wheel Heavy Duty Clamp
HDCLAMP60 $79.50 Inc.GSTAdd to cart In Stock -
36.4kN Pintle Hitch Tow Bar Receiver (6.0t ATM)
PINTLEHOOK-535 $250.25 Inc.GSTAdd to cart In Stock -
On Sale14% off
Caravan Shock Absorbers suit Jayco
SHOCK-610 Original price was: $215.00.$185.00Current price is: $185.00. Inc.GSTAdd to cart In Stock
Reviews