45mm Tandem Slipper Hanger Kit Tandem Axle
Price
$39.95 Inc.GST
Shipping
45mm Tandem Slipper Hanger Kit for 6mm Slipper Springs
45mm tandem slipper hanger Kit suited to tandem axle trailers up to 2400kg. Use only on 6mm springs with three leaf tails. (765mm eye to tail).
Use only on 6mm springs with three leaf tails. (765mm eye to tail)
Slipper Spring Hanger Installation
- Install the rear hanger towards the rear of a 50mm x 50mm angle section
- Measure the rear tail and install the front and rear hanger so that 1/2 of the tail is in the centre of the hanger.
- Clamp the steel angle to the chassis rail with 56mm u-bolts.
- Move the centre hanger to approximately 150mm back of the centre. This position is approximate.
- Measure coupling head weight; it must be no lighter than 5% of the ATM.
45mm Slipper Hanger Kit comprises
- Two Bolts + Nylocks
- 2 x Rear keepers
- 2 x Front Hangers
Important derating factor
Especially relevant, non-loading sharing tandem setups like slipper spring assembles must be de-rated by 20%.
De-rating allows for occasions when most of the trailer weight is on one axle. Excess loading on the axle occurs when one wheel is parked on the gutter.
For example, trailer slipper springs with a rating of 2400kg would be rated on the trailer registration as 1920kg or 20% rather than 2400kg.
Important to note that the hangers be installed 700mm from the centre of the eye to the centre of the rear hanger.
Hangers installed over 700mm centres will cause the rear leaf to jump out under shock loading conditions like deep potholes in the road.
The bolts supplied are 1/2 inch. Most 6mm springs have 1/2 inch ID bushes with 22mm OD.
Finally, hangers installed closer than 700mm centres will cause the spring to lock in the rear hanger and break.
Additional information
| Weight | 6 kg |
|---|---|
| Dimensions | 10 × 10 × 10 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
-
Tray Back Camper Landing Leg Stand
JACK-1.4M $260.00 Inc.GSTAdd to cart In Stock -
10-inch Off-Road Electric Backing Plate – Left
BACK-10E-L-O/R $126.50 Inc.GSTAdd to cart In Stock -
Fixed Handle Drop Leg Jack Stand – ASSW-DL
JACK-DL $230.80 Inc.GSTAdd to cart In Stock -
Pintle Tow Ball Protector – Aftermarket Pintle Hooks
PROTECTOR-509 $48.40 Inc.GSTAdd to cart In Stock -
On Sale14% off
Caravan Replacement Shock Absorbers
SHOCK-610 Original price was: $215.00.$185.00Current price is: $185.00. Inc.GSTAdd to cart In Stock -
Manutec Replacement Grub Screw Jockey Wheel Handle
JOCKEY-HANDLE-GS-M $13.75 Inc.GSTAdd to cart In Stock
Reviews