60mm Round 3t Electric Braked Landcruiser Axle
Price
Price range: $1,120.00 through $1,185.00 Inc.GST
Shipping
Couplemate™ Custom Work axles are made to your needs. After you place your order, one of our team members will contact you regarding your axle length (max. 2500mm).
✓ High-quality, 12-inch electric backing plates.
✓ Fully-assembled axle kit includes greased Japanese bearings.
✓ Solid 60mm round beam
60mm Round 3t Trailer Axle Kit | Highway and Offroad Electric Brakes
3t x 60mm Round offroad electric brake trailer axle. The axle steel is rated to 3t.
Here is why Couplemate makes one of the Best 3t Electric Brake Axles
- Australian Steel
- AL-KO Drums
- Premium electric Backing plates
- Japanese Bearings
- Pre-adjusted brakes
- Further, Couplemates’ lifetime warranty against faulty workmanship.
Couplemate only uses 3t Japanese bearings.
- 1 X 60mm Round Axle rated @ 3000kg
- Pair Offroad Electric Backing Plates + Park rated @ 2500kg
- 1 x Pair of Weld rings on Axle
- 2 x 3000kg Couplemate Landcruiser Drums
- 2 x 3000kg Bearings Sets
When purchasing, please tell us your face-to-face or tip-to-tip measurement. If not, we will call you to verify your setup.
How to calculate Face-to-Face measurement on your axle. Measure the wheel offset.
Calculating The Correct Axle Measurements
Watch the video to understand how to calculate the face-to-face axle measurement.
- Measure the offset wheel. The wheel offset is the distance between the inside of the hub and the outside of the rubber.
- Add 50 mm to the offset. Alternatively, choose your own distance between the rubber and the chassis.
- Multiply by 2 for both sides. Add your chassis width to the above number.
Still unsure of what measurements to take?
Check out this handy guide below:
[P] – Check material specifications. What size and profile is the axle (for example, 45mm Square)
[T] – Overall axle length (tip to tip)
[F] – Hub face-to-hub face measurement
[A] – Chassis width
[C] – Tyre clearance
[B] – Back offset
[H] – Tyre to chassis
[G] – Axle pad centres
How to Identify 3t Bearing Combinations
You will also need to identify your bearing combination, which can be done by pulling off a hub and bearings and locating the number laser-engraved onto the bearing. You will require both the inner and the outer bearing numbers.
Understanding the Calculation
The Face-to-Face measurements to calculate Tip to Tip measurement is as follows
- S/L 150mm Lazy add 100mm
- S/L 10” Electric Drum add 103mm
- 2T 205mm Lazy add 172mm
- 10” Disk Rotor add 98mm
- PLL 10” Electric Drum add 122mm
- 2T 12” Electric Drum add 172mm
Purchase other brake axles and trailer parts here
- 45mm Round Electric Brake Axle Kit
- 45mm Square Electric Brake Axle Kit
- 50mm Square Electric Brake Axle Kit to 1600kg
- 50mm Square x 12-inch Dexter Profile Electric Brake Axle Kit
- 60mm Round 2.25t Electric Braked Landcruiser Axle
- 60mm Round 2.25t Electric Braked Landcruiser Axle Off-Road
- 60mm Round 3t Offroad Electric Braked Landcruiser Axle
- 2t x 50mm Square Electric Brake Axle – 6 Stud Landcruiser
- 3t x 50mm Square Electric Off Road Brake Axle – 5 Stud Landcruiser
- 3t x 50mm Square Electric Off Road Brake Axle – 6 Stud Landcruiser
Finally, all Couplemate electric-braked axles are machined and assembled in Brisbane. Couplemate manufactures caravan axles guaranteed for life.
Additional information
| Weight | 90 kg |
|---|---|
| Dimensions | 240 × 60 × 60 cm |
| Axle Type | 12-inch Electric |
| Axle Rating | 3000kg ATM |
| Bearing Profile | |
| Beam Size | 60mm Round |
| Brake Type | Electric, Electric Off-Road |
| Brand | Couplemate |
| Coating | Natural |
| Drum Size | 12-Inch – Inner Dia |
| Grease Seal Type | Standard |
| Hub Cap | 3" |
| Magnet Type | Standard Highway, Offroad |
| Materials | K1045 Steel |
| Max. ATM | |
| NSK Bearing # | 29749/10, 30210J |
| Stud Pattern (PCD) | 5 Stud Landcruiser (5 x 150mm), 6 Stud Landcruiser (6 x 139.7mm) |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
-
On Sale14% off
Caravan Replacement Shock Absorbers
SHOCK-610 Original price was: $215.00.$185.00Current price is: $185.00. Inc.GSTAdd to cart In Stock -
Manutec Replacement Grub Screw Jockey Wheel Handle
JOCKEY-HANDLE-GS-M $13.75 Inc.GSTAdd to cart In Stock -
AL-KO Mechanical Disc Brake Caliper
CALP-M-AL-FP $84.95 Inc.GSTAdd to cart In Stock -
12-inch Electric Brake Shoes
SHOE-12 $38.00 Inc.GSTAdd to cart In Stock -
60mm Jockey Wheel Heavy Duty Clamp
HDCLAMP60 $79.50 Inc.GSTAdd to cart In Stock -
36.4kN Pintle Hitch Tow Bar Receiver (6.0t ATM)
PINTLEHOOK-535 $250.25 Inc.GSTAdd to cart In Stock
Reviews