Spare Wheel Carrier

Showing all 10 results

Couplemate manufactures the spare wheel carrier at its Wynnum facility. Spare wheel carriers are galvanised and made from 50mm box steel in conjunction with a galvanised stub axle inserted and locked into the box section.

Lazy hubs, Disc Rotors, 10′ Drums or 12″ Drums can be added with greased bearings.

  • Mounts on a trailer chassis 75mm or 100mm wide.
  • Galvanised Bolts and Backing plates
  • Box Steel and stub axles are Hot-Dip Galvanised.

Also, available without hub so you may use your configuration. The spare wheel carriers only can be supplied in the following configuration

Additionally, the height of the wheel carrier can be adjusted vertically by tightening the u-bolts so that the vertical bar is in the desired position.

Finally, carriers can mount on the chassis rail at the front of the trailer or the rear bar behind your caravan.

Spare Wheel Carrier

Coupon Code | "supermarch" | 17% Special Discount available ONLINE SHOP ONLY and are not available in stores. Dismiss

Pin It on Pinterest