Spring Fittings & Hangers
Showing 13–24 of 27 results
-
AK-KO 60mm Rocker Roller Front or Rear Hanger
HANGER-60-RR-FR-AL $26.27 Inc.GSTAdd to cart In stock -
60mm Standard Tandem Center Hanger
HANGER-60-TSH-C $55.00 Inc.GSTAdd to cart In stock -
60mm Rocker Roller Center Pivot Arm – 18mm Bush
ROCKER-60-RR-J $90.00 Inc.GSTAdd to cart In stock -
45mm x 245mm Tandem Rocker Arm
ROCKER-45-245-M $52.80 Inc.GSTAdd to cart In stock -
60mm Standard Tandem Hanger Kit
HANGER-KIT-60-SHACKLE-TANDEM $499.00 Inc.GSTAdd to cart In stock -
60mm Outback Rear Dumbjack
HANGER-60-OB-R-M $40.26 Inc.GSTAdd to cart In stock -
AK-KO 60mm Rocker Roller Centre Spring Hanger
HANGER-60-RR-C-AL $39.53 Inc.GSTAdd to cart In stock -
60mm x 150mm Tandem Rocker Arm
ROCKER-60-150-J $115.01 Inc.GSTAdd to cart In stock -
60mm Front Slipper Hanger
HANGER-60-SH-F $5.43 Inc.GSTAdd to cart In stock -
60mm Outback Front Hanger
HANGER-60-OB-F-M $36.50 Inc.GSTAdd to cart In stock -
60mm Standard Tandem Front – Rear Hanger
HANGER-60-TSH-FR $12.96 Inc.GSTAdd to cart In stock -
45mm x 200mm Tandem Rocker Arm
ROCKER-45-200-CM $39.01 Inc.GSTAdd to cart In stock
Trailer Spring Suspension Parts for slipper and shackle springs
Trailer Spring Suspension or Hanger Kits for Slipper and Shackle Springs. Hangers must be welded at least 25mm from spring when fully extended.
The easiest way to perfect your spring hangers is to bolt the hanger plates onto your spring.
Measure and tac weld the front spring hanger into position.
Stretch the rear spring hanger to measure 25mm longer than your spring.
Tac weld the hanger onto the position.
When fully loaded, the outback spring shackle plate should point toward the rear of your trailer at 5 pm (left) and 7 pm (right)
Alternative Installation Method
Install spring hangers on a piece of angle iron and install the spring. Secure the angle iron onto the chassis rail with U-bolt clamp kits.
Slide the spring up and down the chassis rail until it is perfectly centred on the trailer chassis.