Shock Absorber Mounting Kit
Price
$33.00 Inc.GST
Shipping
Shock Absorber Mounting Kit
Shock Absorber Mounting Kit consists of the following brackets:
- 1 x 10mm Left Bottom mount plate for trailer shock absorbers. (passenger side)
- 1 x 10mm Right Bottom mount plate for trailer shock absorbers. (driver side)
- 2 x 40mm Top Brackets.
- Suit Shock absorbers with 12mm bolts.
The flat place is slotted to suit 45mm to 60mm Springs with 1/2 inch or 5/8 inch U bolts. If using 45mm springs, you may need to slice 15mm off the bottom plate to shorten this plate.
Articles
- How long do shock absorbers last?
- Caravan Shock Absorbers
Important:
Locate the top bracket so that the shock absorber top hangs towards the rear of the trailer at an angle of 15%. This angle can vary a little; however, the greater the angle, the less effective the shock absorbers.
The greater the angle, the less effective the shock absorber becomes.
Folks have told me that these shock absorbers have failed and need replacing. Upon inspection, the outer casting was pitted with stone dints without puncturing the casting.
In this case, shock absorbers expire at the end of life. The most straightforward test is to remove the shock absorber, compress it, and then decompress it. If there is little resistance on any compression stroke, replace the shock absorber.
It’s a good idea to check the bolts, which may also need replacing. Good quality shock absorbers are supplied with replacement bolts.
In a vehicle, shock absorbers reduce the effect of travelling over rough ground, leading to improved ride quality and vehicle handling. While shock absorbers serve the purpose of limiting excessive suspension movement, their sole intended purpose is to damp spring oscillations.
Shock absorbers use the valving of oil and gasses to absorb excess energy from the springs.
Manufacturers chose spring rates based on the weight of the vehicle, loaded and unloaded. Some people use shocks to modify spring rates but this is not the correct use.
Along with hysteresis in the tyre itself, they dampen the energy stored in the motion of the unsprung weight up and down. Effective wheel bounce damping may require tuning shocks to an optimal resistance.
Purchase standard Alko shock absorbers here.
- Al-ko IRS Shock Absorber
- Caravan Shock Absorbers
- Caravan Shock Absorbers plus Hanger Kit
- Al-ko Long Shock Absorber – Highway and Offroad
Additional information
| Weight | 3 kg |
|---|---|
| Dimensions | 15 × 8 × 8 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
-
12-inch Electric Brake Shoes
SHOE-12 $38.00 Inc.GSTAdd to cart In Stock -
Tray Back Camper Landing Leg Stand
JACK-1.4M $260.00 Inc.GSTAdd to cart In Stock -
10-inch Off-Road Electric Backing Plate – Left
BACK-10E-L-O/R $126.50 Inc.GSTAdd to cart In Stock -
Fixed Handle Drop Leg Jack Stand – ASSW-DL
JACK-DL $230.80 Inc.GSTAdd to cart In Stock -
Manutec Replacement Grub Screw Jockey Wheel Handle
JOCKEY-HANDLE-GS-M $13.75 Inc.GSTAdd to cart In Stock -
AL-KO Mechanical Disc Brake Caliper
CALP-M-AL-FP $84.95 Inc.GSTAdd to cart In Stock
Reviews