45mm Tandem Slipper Hanger Kit Tandem Axle

Part No: SLKT Category:
Part No: SLKT Category:

Price

$46.00 Inc.GST

Shipping

Select delivery location

Couplemate accepts PayPal, Visa and Mastercard.

45mm Tandem Slipper Hanger Kit for 6mm Slipper Springs

45mm tandem slipper hanger Kit suited to tandem axle trailers up to 2400kg. Use only on 6mm springs with three leaf tails. (765mm eye to tail).

Use only on 6mm springs with three leaf tails. (765mm eye to tail)

Slipper Spring Hanger Installation

  • Install the rear hanger  towards the rear of a 50mm x 50mm angle section
  • Measure the rear tail and install the front and rear hanger so that 1/2 of the tail is in the centre of the hanger.
  • Clamp the steel angle to the chassis rail with 56mm u-bolts.
  • Move the centre hanger to approximately 150mm back of the centre. This position is approximate.
  • Measure coupling head weight; it must be no lighter than 5% of the ATM.

45mm Slipper Hanger Kit comprises

Important derating factor

Especially relevant, non-loading sharing tandem setups like slipper spring assembles must be de-rated by 20%.

De-rating allows for occasions when most of the trailer weight is on one axle. Excess loading on the axle occurs when one wheel is parked on the gutter.

For example, trailer slipper springs with a rating of 2400kg would be rated on the trailer registration as 1920kg or 20% rather than 2400kg.

Important to note that the hangers be installed 700mm from the centre of the eye to the centre of the rear hanger.

Hangers installed over 700mm centres will cause the rear leaf to jump out under shock loading conditions like deep potholes in the road.

The bolts supplied are 1/2 inch. Most 6mm springs have 1/2 inch ID bushes with 22mm OD.

Finally, hangers installed closer than 700mm centres will cause the spring to lock in the rear hanger and break.

 

 

Additional information

Weight6 kg
Dimensions10 × 10 × 10 cm

Our Service Lifetime Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.

Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.

Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.

60-Day Returns

After 60 years of experience, we know that life has its unpredictable moments.

All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.

You can view our full policy for change-of-mind returns here.

Reviews

    Be the first to review “45mm Tandem Slipper Hanger Kit Tandem Axle”

    Your email address will not be published. Required fields are marked *

    High-Quality Trailer Parts

    Couplemate™ Core Range

    Couplemate Trailer Parts.

    About Us

    Contact Info

    Trade & Wholesale

    Australian Made

    Australian Made

    FAQ