50mm SQ x 2.25t Galvanised Marine Axle
Price
Price range: $408.00 through $460.00 Inc.GST
>
Shipping
50mm Square 2.25t Axle Galvanised
A 50mm Square 2t galvanised axle is hot-dip galvanised and rated up to 2250kg. Axles listed on this page have a marine turn.
Axle length is measured from tip to tip. Axles are supplied with a nut, a washer and a split pin.
Heavy loads on light axles cause axle flex, leading to axle vibration at high speeds. This vibration occurs in the middle of the axle, causing it to “wobble.”
Is your axle bending in the middle by more than 5mm?
Do yourself a favour and run a straightedge along your axle.
Overloading your axle causes excessive axle bending and premature spring aging. As a result, axle flex prematurely ages the trailer spring via vibration at high speeds.
Key Features of the 2t Japanese Marine Bearing Kit
- Inner ID 50mm, OD 89.96mm SKU HR30210
- Outer ID 31.75mm, OD 61.95mm SKU 15123/15245
- Seal ID 60.3mm, OD 89.96mm SKU 494013
- Grease Cap OD 63.5mm SKU CM498
Hot Dipped Galvanised Axles below:
- 50mm Square Hydraulic Disc Brake Axle
- 50mm Square Galvanised U Bolt Kit
- Land Cruiser Disc Rotor 2t – Al-ko
News Articles
- Easy Steps to Install a Marine Bearing Seal Correctly
- How to Fix Excessive Disc Pad Wear
- Guide to Wheel Bearings
Axles and their maximum rating.
- 39mm Round Axle – 750kg
- 39mm Round Galvanised Axle – 750kg
- 40mm Square Axle – 1000kg
- 40mm Square Galvanised Axle – 1000kg
- 45mm Round Galvanised Axle – 1600kg
- Square Axle 45mm – 1450kg
- 45mm Square Parallel Axle – 1600kg
- 45mm Galvanised Square Axle – 1600kg
- Square 50mm Slimline Galvanised Axle – Marine
- 50mm Square Axle – 2500KG
- 50mm Galvanised Square Axle – 2250kg
- 60mm Round Trailer Axle 2t or 3t
- 60mm Round Axle – 3000kg
Key Features of the 2t Japanese Marine Bearing Kit
Additional information
| Weight | 90 kg |
|---|---|
| Dimensions | 240 × 60 × 60 cm |
| Axle Length | 1500mm – 1800mm, 1800mm – 2000mm, 2000mm – 2200mm, 2200mm – 2300mm, 2300mm – 2500mm |
| Beam Size | 50mm Square |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
You must be logged in to post a review.
Related products
-
40mm SQ Axle
Price range: $198.00 through $248.00 Inc.GST -
50mm SQ Axle – Slimline Electric
Price range: $278.00 through $359.00 Inc.GST -
Hydraulic Caliper Anchor Plate
Price range: $15.40 through $52.84 Inc.GST -
60mm RND x 2.25t Galvanised Axle
Price range: $300.00 through $593.00 Inc.GST -
45mm Round Stub x 45mm Square Beam x 3-inch Drop
$45.00 Inc.GST -
1-inch Axle Washer (Active Fabrication PLL)
$8.38 Inc.GST
Reviews