Hydraulic Master Cylinder Park Brake – 610949
Price
$37.94 Inc.GST
Shipping
Hydraulic Master Cylinder Park Brake – Zinc
Hydraulic master cylinder park brake fits 7/8-inch, 3/4-inch and 1-inch hydraulic master cylinders.
This zinc bracket is also a parking brake for hydraulic braking systems.
- Fit the master cylinder bracket on the rear bolt mounts
- Bolt hole mounts are 54mm between centres
- Select 1/2-inch bolts that bolt right through your bracket, coupling and drawbar
- Disconnect the parking brake
- Adjust the lower nut 2mm from the back of the override, then lock it off.
Further, we have more information from our engineer
- you must have at least 2mm free play, between 2mm and 5mm, when the hydraulic brake pads start to wear
- if there is no free play, as soon as the brakes start to work and get a little warm, you will start to get brake build-up, increasing heat and burning out your brakes or even popping the seals in the master cylinder
Also suitable for use with Hydrastar brake controllers. Use as park brake only with the correct master cylinder.
It is also known as 610943 when used in conjunction with a master cylinder.
Purchase Master Cylinders here
- 3/4″ Master Cylinder on a bracket for single axle trailers
- 7/8″ Master Cylinder on a bracket for tandem axle trailers
- 1″ Master Cylinder on a bracket for tri-axle trailers
- 2000kg Override Coupling to suit the above master cylinders
Complete Range of Park Brakes
- 50mm Park Brake Handle for Boat Trailer – 614048
- 75mm Park Brake Handle for Boat Trailer – 614046
- 100mm Park Brake Handle for Boat Trailer – 614044
- AL-KO Override Park Low Profile Hand Brake
- Manutec Push Button Park Brake
- Hydraulic Master Cylinder Park Brake – 610949
- Trojan RH Hydraulic Caliper Park Brake – 993434
- Trojan LH Hydraulic Caliper Park Brake – 993432
- Trailer Brake Cable Kit
Additional information
| Weight | 2 kg |
|---|---|
| Dimensions | 20 × 10 × 10 cm |
Our Service Lifetime Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Couplemate™ is a manufacturer and vendor of high-quality towing, trailer, and caravan components. Couplemate™ Core Goods and Custom Work are guaranteed to be free of defects for the service lifetime of the product when used as intended.
Warranties are non-transferrable and Couplemate™ requires satisfactory proof of purchase prior to issuing a remedy. The full Couplemate™ Warranty Policy can be found in the Terms & Conditions: Section 8 – Consumer Guarantees & Warranty.
Warranties are in addition to your rights under the Australian Consumer Law. If something is wrong with your order, please contact our team.
60-Day Returns
After 60 years of experience, we know that life has its unpredictable moments.
All Couplemate™ orders (online, over the phone, or in-store) have a 60 day period for change-of-mind returns and exchanges. There are some items that can’t be returned and some returns may incur a 15% restocking fee.
You can view our full policy for change-of-mind returns here.
-
Manutec Replacement Grub Screw Jockey Wheel Handle
JOCKEY-HANDLE-GS-M $13.75 Inc.GSTAdd to cart In Stock -
AL-KO Mechanical Disc Brake Caliper
CALP-M-AL-FP $84.95 Inc.GSTAdd to cart In Stock -
On Sale14% off
Caravan Replacement Shock Absorbers
SHOCK-610 Original price was: $215.00.$185.00Current price is: $185.00. Inc.GSTAdd to cart In Stock -
Pintle Tow Ball Protector – Aftermarket Pintle Hooks
PROTECTOR-509 $48.40 Inc.GSTAdd to cart In Stock -
12-inch Electric Brake Shoes
SHOE-12 $38.00 Inc.GSTAdd to cart In Stock -
60mm Jockey Wheel Heavy Duty Clamp
HDCLAMP60 $79.50 Inc.GSTAdd to cart In Stock
Reviews