Last updated on October 15th, 2019 at 10:17 am
Trojan hydraulic disc caliper is supplied with Stainless bolts, spring washers and disc pads. For use with 10-inch and 12-inch disc rotors.
These are cast in SG iron and are Electro Zinc Plated for protection against corrosion. These calipers are fitted with a Phenolic piston which is a high strength non rusting material. Fittings, such as slide pins and bleed screws, are brass while other fittings are Stainless Steel.
- 10-inch and 12-inch disc rotors.
- 1500kg per axle with 225mm rotors.
- 2000kg per axle with 275mm rotors.
- Suitable for disc thickness from 10mm to 15mm.
The latest Trojan caliper mounts onto a threaded anchor plate.
Trojan Mark 5, 6 and 7 are out of production.
Trailer weights exceeding 2000 kg require independent control and breakaway facility, causing the brakes to be activated should the towing vehicle when the trailer becomes accidentally disconnected.
You may like to consider stainless pistons in your hydraulic caliper for improved performance. Click the image to purchase the Trojan Stainless model.
Tip: When changing or checking disc pads, squeeze the piston home a little by applying a G clamp to the piston.
As a result, this procedure will give you extra room to insert the disc pads.