10 inch Dexter style Hydraulic Brake
10-inch Dexter style hydraulic brake backing plate is similar to those reliable and efficient parts used in the automotive industry for many years.
This universal hydraulic backing plate replaces all backing plates except the older Westco versions.
If replacing older versions you will need to cut and reinstall your weld ring.
Install adjuster on the bottom of the backing plate.
Hydraulic brake backing plates are sold in Left and Right. The right side is the driver’s side.
Often it is easier to replace the entire assembly than install replacement hydraulic brake shoes or wheel cylinders.
Note 9″ and 10″ brake cylinders are not interchangeable.
- 10″ x 2-1/4″ Right-hand side or Left-Hand side Hydraulic Brake Assembly
- 1590kg capacity per pair
- Single wheel cylinder (Most Common Style)
- Used with 10″ Hub/Drums
- Mounting studs included
How to adjust hydraulic brakes.
Tip: Look inside your wheel cylinder connection to see if there is an olive locator for your hydraulic hose. If not, you will require an adaptor nut.
Purchase replacement spare parts below:
- Dexter Axle E-Z Lube Retainer Kit.
- 50mm Hydraulic Coupler.
- Adaptor nut.
- Master cylinder.
- 2t Override Coupling | AL-KO
Couplemate Trailer Parts sells only the best quality 10 inch Dexter Style Hydraulic Brake and caravan spare parts throughout Australia.
Customers are welcome to either pickup or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.
We also ship products to New Zealand via Australia Post Air Express.
© Steve Wotherspoon September 1, 2017. Images and text may be copied, provided a link back to the copied page and the source is displayed where the content or image is located.
Last Updated on