Description
BatteryPlus35 Management System
BatteryPlus35 Management System gives you control over your caravan’s house battery and 12V appliances.
Please Note: – Installation is to be carried out only by suitably qualified personnel.
A battery management system is just like a house distribution board. Connect a visual display to your Batteryplus356 to easily review power usage.
BMPRO offers all-in-one solutions that include a power supply and distribution board for 12V loads plus a smart charger and multiple battery protection features with built-in LVD and automatic fuses.
Caravan Battery Management Systems require installation at a factory level. Jayco caravans feature J35 series power management systems, while other leading brands currently install the BatteryPlus35 II series.
Designed and manufactured in Australia, caravan power and battery management systems are highly reliable and efficient solutions for your recreational vehicle.
0Used together with one of the BMPRO battery monitors, they provide RVers with detailed knowledge and control over their caravan power requirements.
BatteryPlus35 SI
Key Features
- Total output current 35A
- 20A multistage battery charger
- Inbuilt solar PWM regulator (240W, 20A, 25V max input)
- Distribution board with 12 at 10A and 2 at I5A DC outputs for load connection
- Electronic resettable fuses
- CAN bus connection for BMPRO accessories
- In-built battery management system
- Solar and Aux Blending
- Auxiliary DC input
- Load current limit
- Low voltage disconnect
- Compatible with AGM, Wet, Gel deep cycle batteries
BatteryPlus35-II-SI is a complete battery management system designed specifically for recreational vehicle applications.
This all in one power solution combines a 35A power supply for 12V loads, 20A multi-stage AC charging and 20A Solar PWM regulation as well as a host of battery protection features.
For more robust solar capability, choose a BatteryPlus35-II-SR with an inbuilt 30A Solar MPPT regulation.
Connect the unit via CAN bus to the Trek battery monitor or to Odyssey touch screen via the OdysseyLink to monitor the status of your battery. Also, control your caravan features and functions or use it to connect to the BC300 to monitor high currents via CommLink.
Solar Panels
Connect solar panels to the solar battery management system and pow0er your adventures with renewable energy.
BatteryPlus35-II-SI is pre-cabled with a permanent mains power supply cord for use with 240V or 110V input power – great for powered sites.
The unit also features a 40A rated uncontrolled +BRK battery output.
This output is specifically designed for loads that do not need to be isolated or have a current rating of higher than the inbuilt circuit protection of the individual outputs and have a current rating of less than 40 A.
Use it to connect, for example:
• Proactive Electronic Stability Control SwayControl
• Emergency Trailer Break-Away Safety System TrailSafe
Lithium Iron Phosphate (LiFePO4)
For Lithium-Ion batteries, check BatteryPlus-II-HA high amperage battery management system featuring a charger with a lithium profile.
BMPRO recommend Lithium Iron Phosphate (LiFePO4) Battery for BatteryPlus management systems.
Specifications
- Input Voltage Range 110-240V AC ± 10%, 50-60Hz
- Output Current 35A (Load + Battery Current)
- Factory Set Voltage 13.65V (Float Voltage)
- Output Ripple Voltage <150mV
- Battery Current Limit max. 20A
- Low Voltage Disconnect 10.5V ± 0.2V
- Battery Connect after LVD 12.8V ± 0.2V
- Battery Drain <15mA (when in Storage Mode)
- AC/DC Efficiency >83%
- Cooling Fan Thermally Controlled
- Ambient Temperature 0-50 °C
- Communication bus available
- Weight 2kg
Downloads
BatteryPlus35 SA – Solar
Key Features
- Total output current 35A
- 20A multistage battery charger
- Inbuilt solar MPPT regulator (420W, 30A, 25V max input)
- Distribution board with 12 at 10A and 2 at I5A DC outputs for load connection
- Electronic resettable fuses
- CAN bus connection for BMPRO accessories
- In-built battery management system
- Solar and Aux Blending
- Auxiliary DC input
- Load current limit
- Low voltage disconnect
- Compatible with AGM, Wet, Gel deep cycle batteries
BatteryPlus35-II-SR is a complete solar battery management system designed specifically for recreational vehicle applications.
This all in one power solution combines a 35A power supply for 12V loads, 20A multi-stage AC charging and 30A Solar MPPT regulation as well as a host of battery protection features.
Connect the unit via CAN bus to the Trek battery monitor or to Odyssey touch screen via the OdysseyLink to monitor the status of your battery. Also to control your caravan features and functions or use it to connect to the BC300 to monitor high currents via CommLink.
Connect solar panels to the solar battery management system and power your adventures with renewable energy.
BatteryPlus35-II-SR is pre-cabled with a permanent mains power supply cord for use with 240V or 110V input power – great for powered sites.
The unit also features a 40A rated uncontrolled +BRK battery output.
This output is specifically designed for loads that do not need to be isolated or have a current rating of higher than the inbuilt circuit protection of the individual outputs and have a current rating of less than 40 A.
Specifications
- Input Voltage Range 110-240V AC ± 10%, 50-60Hz
- Output Current 35A (Load + Battery Current)
- Factory Set Voltage 13.65V (Float Voltage)
- Output Ripple Voltage <150mV
- Battery Current Limit max. 20A
- Low Voltage Disconnect 10.5V ± 0.2V
- Battery Connect after LVD 12.8V ± 0.2V
- Battery Drain <15mA (when in Storage Mode)
- AC/DC Efficiency >83%
- Cooling Fan Thermally Controlled
- Solar Output Current 30A (nominal)
- Solar Start Voltage 17.5V
- Input Voltage Solar (after start-up) 15-25V
- Ambient Temperature 0-50 °C
- Communication bus available
- Weight 2kg
- Solar Start Voltage 17.5V
- Communication bus available
Downloads
BatteryPlus35 HA – Solar – Lithium
BMPRO’s BatteryPlus35HA is a revolutionary high amp battery management system designed for high amperage battery charging and is LiFePO4 (Lithium capable).
This all in one power solution includes a 35A power supply for 12V loads, 30A multi-stage AC and Solar MPPT charger and a host of battery protection features.
Specifications
- Total output current 35A
- 30A multistage battery charger
- Inbuilt solar MPPT regulator (420W, 30A, 25V max input)
- Distribution board with 12 at 10A and 2 at I5A DC outputs for load connection
- Electronic resettable fuses
- CAN bus connection for BMPRO accessories
- In-built battery management system
- Solar and Aux Blending
- Auxiliary DC input
- Load current limit
- Low voltage disconnect
- Compatible with lead-acid and lithium (LiFePO4) deep cycle batteries
Key Features
BatteryPlus35-II-HA is a complete high amp battery management system designed to support the transition of caravans to lithium batteries.
This all in one power solution combines a 35A power supply for 12V loads, 30A multi-stage AC charging and 30A Solar MPPT regulation as well as a host of battery protection features.
- Connect the unit via CAN bus to the Trek battery monitor or
- Connect to Odyssey touch screen via the OdysseyLink to monitor the status of your battery and to control your caravan features and functions
- or use it to connect to the BC300 to monitor high currents via CommLink.
BatteryPlus35-II-HA is pre-cabled with a permanent mains power supply cord for use with 240V or 110V input power – great for powered sites.
The unit also features a 40A rated uncontrolled +BRK battery output.
This output is specifically designed for loads that do not need to be isolated or have a current rating of higher than the inbuilt circuit protection of the individual outputs and have a current rating of less than 40 A.
Use it to connect, for example:
- Proactive Electronic Stability Control SwayControl
- Emergency Trailer Break-Away Safety System TrailSafe
- Heaters
- Stereo memory
Designed and manufactured in Australia, the slim and sturdy BatteryPlus35-II-HA is fully equipped to charge the current generation of deep cycle batteries.
Connect solar panels to the battery management system and power your adventures with renewable energy. Swap your caravan battery to the LiFePO4 deep cycle and harness the benefits of lithium.
This high amp battery management system is specially designed to ensure the best performance and longevity of lithium batteries.
Specifications
- Input Voltage Range 110-240V AC ± 10%, 50-60Hz
- Output Current 35A (Load + Battery Current)
- Factory Set Voltage 13.65V (Float Voltage)
- Output Ripple Voltage <150mV
- Battery Current Limit max. 30A
- Low Voltage Disconnect (Lead Acid) 10.5V ± 0.2V
- Battery Connect after LVD (Lead Acid) 12.8V ± 0.2V
- Low Voltage Disconnect (LiFePO4) 12.0V ± 0.2V
- Battery Connect after LVD (LiFePO4) 13.8V ± 0.2V
- Battery Drain <15mA (when in Storage Mode)
- AC/DC Efficiency >83%
- Cooling Fan Thermally Controlled
- Solar Output Current 30A (nominal)
- Solar Start Voltage 17.5V
- Input Voltage Solar (after start-up) 15-25V
- Ambient Temperature 0-50 °C
- Communication bus available
- Weight 2kg
Downloads
Register your Product
Registering your BMPRO product is an important step to ensure that you receive all of the benefits you are entitled to.
Please complete the online registration form for your new product today.
BMPRO BatteryPlus35 II Management System
Couplemate Trailer Parts sells only the best quality BatteryPlus35 II Management System and caravan spare parts throughout Australia.
Customers are welcome to either pickup or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.
We also ship products to New Zealand via Australia Post Air Express.
© Steve Wotherspoon May 18, 2020. Images and text may be copied, provided a link back to the copied page and the source is displayed where the content or image is located.
Reviews
There are no reviews yet.