J35 Battery Management System
The BMPRO J35 battery power management system gives you control over your caravan’s house lithium battery and 12V appliances.
Please Note: – Installation is carried out only by suitably qualified personnel.
BMPRO J35 offers all-in-one solutions, including a power supply and distribution board for 12V loads, an intelligent charger, and multiple battery protection features with built-in LVD and automatic fuses.
Couplemate stock BMPRO products in Queensland. For Technical Help, please call BMPRO Customer Support on 03 9213 8430
Jayco caravans feature J35 series power management systems, while other leading brands install the BatteryPlus35 series.
Designed and manufactured in Australia, caravan power management systems are highly reliable and efficient solutions for your recreational vehicle.
Compatible Battery Monitors
- JHub Incl Control Node
- JControl Digital Caravan Battery Monitor
Key Features
- 14 x 12VDC outputs
- 35A maximum output current
- 30A maximum charging current
- Solar 28 Amp
- Lithium (LiFePO4) compatible
J35 Model D is lithium compatible power and battery management system. It features a built-in solar regulator and a multistage battery charger to ensure long battery life.
Use J35D battery management system to charge all lead-acid and lithium (LiFePO4) batteries. The J35D allows charging of battery banks of up to 600Ah in capacity.
J35D allows you to charge the caravan battery to the optimal charge level from 230-240 Volt mains, your solar panel (28 Amp, or three panels 450W total), or any auxiliary input, such as a power generator or your vehicle.
J35D will increase the life span of your battery thanks to the multiple battery protection features, such as low voltage disconnect, storage mode and multistage charging.
DC Applications
There are 14 outputs to connect your DC appliances, including hot water, water pump, lights, and many more. Built-in electronic fuses protect the loads.
Built-in the top of the range Jayco caravans, the J35D can recover and charge a heavily discharged LiFePO4 battery. The internal Battery Management System (BMS) of a LiFePO4 battery will turn off if it detects that the battery is heavily discharged.
The J35D will provide the voltage to restart the LiFePO4 battery’s BMS and then start charging the LiFePO4 battery.
J35D System Specifications
- Input Voltage Range: 240 VAC nominal, ± 10%, 50-60 Hz
- Input Surge: < 40 A (cold start)
- Output Current: 35A Continuous (load + battery current)
- Factory Set Voltage: 13.65 V ±2% (Float voltage)
- Output Ripple Voltage: < 150 mV
- Over Voltage Protection: < 18 V
- Over Current Protection: 35A to 38A (load + battery current)
- Battery Current Limit: 30A max
- Battery Connect: 10.8 ± 0.2 V
- Low Voltage Disconnect: 10.8 ± 0.2 V for lead acid, 12.0 ± 0.2 V for LiFePO4 batteries
- Battery Drain after LVD: < 7mA
- Efficiency: > 83 %
- Cooling Fan: Thermally controlled
- Ambient: 0°C – 50°C
- Communication: CAN bus
- Weight: 2 kg
- Standards: Safety: IEC60335-2-29, IEC62109-1,UL458, CSA, C22.2 No.107-1, EMC: CISPR 14, IEC61000-3-2, IEC61000-3-3 Approvals: RCM, UL, cUL
J35 Battery Power Management System Model B-L
Key Features
- 4 x 12VDC outputs
- 35A maximum output current
- 29A solar input current
- Lithium (LiFePO4) compatible
J35 Model B-L is an intelligent power management system with a distribution system and a multistage battery charger. J35B-L model has been specially designed for Jayco and can be found on-board modern caravans and motorhomes.
Use J35B-L BMS for charging 12V Sealed Lead-Acid (SLA) batteries, including valve-regulated lead-acid (VRLA) batteries, both absorbed glass mat (AGM) and gel batteries.
The BMPRO battery management system is also compatible with lithium batteries (LiFePO4). The power supply can deliver 35A maximum to the battery and loads.
Charging
Charge your battery to the optimal charge level from AC mains, solar panels, or auxiliary (DC or vehicle power). A maximum DC charging current is 15 Amp.
A multistage battery charger includes bulk, absorption, float, and periodic boost charging modes to ensure long battery life.
The J35B-L System supports up to 300W panels with an open-circuit voltage between 18 and 28 VDC.
J35B-L keeps your battery healthy for a long time thanks to the multiple battery protection features, such as low voltage disconnect and storage mode.
Built-in electronic fuses protect the loads. You can also use up to 14 outputs to connect your appliances, including hot water, water pump, lights, etc.
They will allow you to get access to monitoring your power supply status in a handy location. Moreover, when used with the ControlNode103, J35B-L is SmartConnect-ready and monitors multiple Bluetooth sensors via the JHub app.
Find the full range of Battery Management products
- 100A Bluetooth Smartphone Battery Management Monitor
- BC300 plus Commlink – BMPRO
- BatteryPlus35 II Management System
- Genius 15-35 RV Power Supply
- Genius 30-35 RV Power Supply
- MiniBoost DC–DC Smart Battery Charger
- Odyssey Battery Management System
- Trek3 Display RV Battery Monitor
- Control Node 103
- OdysseyLink103
- RVView2 Display Monitor
- Smart Connect Bluetooth Sensor Kit
- Caravan Electronic Sway Controller
- 100Ah Lithium LiFePo4 Battery Bluetooth
- 200Ah Lithium LiFePO4 Battery Bluetooth
Additional information
Weight | 5.1 kg |
---|---|
Dimensions | 35 × 25 × 8 cm |
J35 |
Reviews