Dexter Caravan Bearing Kits

$30.72$90.89 inc GST

or 4 fortnightly payments from $7.68 with Afterpay More info

Clear
SKU: N/A Categories: ,

Description

Dexter Bearing Kits to suit Trailers and Caravans

Dexter Bearing Kits suit American Dexter Marine Trailer and Caravans Long Haul Japanese bearings. 1.6t and 2t.

Melbourne Trailer and Caravan Supplies (MTCS) were the Australian distributors of Dexter Trailer products, Melbourne for over 30 years.

These products included Dexter Bearings Melbourne and other Dexter products and spare parts.

Dexter in recent years purchased Al-ko International and then integrated MTCS into the Al-ko distribution network,

1.6t Dexter bearings are easy to identify and as a result, easy to purchase.

2t Dexter bearings are difficult to identify because there are several variations in outer bearings and seal. The inner bearing will be consistent (25580).

Note: Dexter bearings do not fit 39mm round or 40mm square axles.

The bearing kit includes front and back bearings, seal and pressed steel hub cover.

1.6t Dexter Bearing Kit (3500lbs)(CM483)

  1. Inner ID 35.00mm, OD 59.97mm – 68149/111
  2. Outer ID 27.00mm, OD 50.29mm – 44649/10
  3. Seal ID 44mm, OD 65.22mm – GS-1719DL
  4. Grease Cap 1.98″

2t Dexter Bearing Kit (CM484USA2T)

  1. Bearing ID 44.45mm, OD 82.93mm – 25580/20
  2. Outer ID 31.75mm, OD 61.95mm – 15123/245
  3. Seal ID 1.937″ OD 3.375″ – 33940
  4. Grease Cap DC2441

2t Dexter Bearing Kit (CM484USA2T-2.00)

  1. Bearing ID 44.45mm, OD 82.93mm – 25580/20
  2. Outer ID 31.75mm, OD 61.95mm – 15123/245
  3. Seal ID 1.937″ OD 3.375″ – 33970
  4. Grease Cap DC2441

2t Dexter Bearing Kit (CM484USA2T-2.125)

  1. Inner ID 44.45mm, OD 82.93mm – 25580/20
  2. Outer ID 31.75mm, OD 61.95mm – 15123/245
  3. Seal ID 2.125″, OD 3.376″ – GS-2125DL (Double Lip)
  4. Grease Cap DC2441

2t Dexter Bearing Kit (CM484USA2T-2.25)

  1. Inner ID 44.45mm, OD 82.93mm – 25580/20
  2. Outer ID 31.75mm, OD 61.95mm – 15123/245
  3. Seal ID 2.25, OD 3.376″ – GS-2250DL (Double Lip)
  4. Grease Cap DC2441

Melbourne Trailers 2t Dexter Bearing Kit  (CM484MEL2T)

  1. Inner ID 44.45mm, OD 82.93mm – 25580/20
  2. Outer ID 31.75mm, OD 59.10mm – 67048/10
  3. Seal ID 50mm, OD 85mm – 64190
  4. Grease Cap CM498

Melbourne Trailers 2t Dexter Bearing Marine Kit  (CM484MEL2TM)

  1. Inner ID 44.45mm, OD 82.93mm – 25580/20
  2. Outer ID 31.75mm, OD 61.95mm – 15123/245
  3. Seal ID 50mm, OD 85mm – 82130
  4. Grease Cap CM498

Bearings are rated as follows

  • 1450kg – 45mm Round or Square Axle (Ford or Slimline Bearings)
  • 1450kg – 50mm Round or Square Axle (Ford or Slimline Bearings)
  • 1600kg – 45mm Round or Square Axle (Parallel Bearings)
  • 1600kg – 50mm Round or Square Axle (Parallel Bearings)
  • 45mm Round or Square Axle (Dexter 1.6t Bearings)
  • 1600kg – 50mm Round or Square Axle (Dexter 1.8t Bearings)
  • 2250kg – 50mm Square or 60mm Round Axles (2.25t Bearings)

It is wise to remove the old bearing cups when replacing bearings. Cups and races are subject to wear and tear. If you witness carbon black in your grease or black grease, cups and races need to be replaced immediately.

Low-quality bearings have poor coatings and low tolerances. These bearings wear quickly and are not suitable for long-haul, high-speed use.

Use high temperature bearing grease for use at high speeds.

Fits the following hub, disc and drums

Couplemate Trailer Parts sells only the best quality Dexter Caravan Bearing Kits and caravan spare parts throughout Australia.

Customers are welcome to either pickup or take advantage of our low freight rates. Express shipping to Melbourne, Sydney, Brisbane, Perth, Adelaide, Darwin, and Hobart.

We also ship products to New Zealand via Australia Post Air Express.

© Steve Wotherspoon September 5, 2016. Images and text may be copied, provided a link back to the copied page and the source is displayed where the content or image is located.

Additional information

Weight N/A
Dimensions N/A
Bearing Type

, , , , , , , ,

Reviews

There are no reviews yet.

Be the first to review “Dexter Caravan Bearing Kits”