Trailer Disc Brake Rotor – ElectroGal
The ElectroGal trailer disc brake rotor is 10 inches in diameter and is used for braking boat trailers up to 1450kg. Electrogal disk rotors are manufactured in Australia by Couplemate.
High-grade steel was chosen as the foundation to build this superior disc rotor.
This disc rotor sets the industry standard for disc-braked axles and is the most popular rotor in our axle builds.
ElectroGal
ElectroGal is a rust-inhibiting electrolytic coating formed on disc rotors due to the application of an electric current onto an anode and cathode.
The disc rotors are chemically clean of oils, dirt, dust and grime before being electrically bonded to a preparation coating before the ElectroGal process.
Disc stud patterns are Ford, HT & HQ
- Ford 4.5″ P.C.D.
- HT 4.25″ P.C.D.
- HQ 4.75″ P.C.D.
ElectroGal rotors suit standard bearings on 39mm Round Axles to 40mm Square axles or SL bearings for 45mm Round Axles and larger.
Trailer Bearing Kit required but not included
- Inner Bearing ID 35.00mm, OD 59.10mm
- Outer Bearing ID 22.00mm, OD 45.20mm
- Seal ID 43.9mm, OD 59.10mm
- Dust Cap 45.20mm
A larger capacity braked disc rotor is available for 1600kg and 2250kg ratings and suits 5-stud and 6-stud Landcruiser hubs only.
Compatible with the following equipment:
- Mechanical Caliper Anchor Plate
- Hydraulic Caliper Anchor Plate
- Al-ko Mechanical Disc Caliper – Forward or Center
- Al-ko Hydraulic Disc Caliper
- Stainless Hydraulic Disc Caliper Al-ko
- 2t Landcruiser Disc Rotor – ElectroGal
- 12″ x 3t Disc Rotor Couplemate – ElectroGal
ElectroGal Disc Brake Rotor – 1450kg Maximum rating
Additional information
Weight | 9 kg |
---|---|
Dimensions | 10 × 30 × 30 cm |
Stud Pattern | Ford, 5 x 114.3mm (1/2"), HT (5 x 108mm), HQ Holden, 5 x 4.75" (7/16") |
Reviews